Installation Instructions – Replacement Microwave Door Switch for SNAP Supply, LLC’s products Unplug power cord Remove microwave screws that secure the grill Open microwave door slightly and remove screws securing the microwave control panel Lift up the release the control...
Installation Instructions – Replacement Inducer Motor Blower Wheel for SNAP Supply, LLC’s LA11AA005 Disconnect electrical power supply to the appliance remove the access panel to the HVAC System Remove motor from housing by removing all the screws holding it in...
Installation Instructions – Replacement Surface Element Switch for SNAP Supply, LLC’s 3149400 Disconnect electrical power supply to the appliance Remove back panel that houses the Surface Element Switch. Remove the knob and release the 2 screws holding switch in place....
Installation Instructions – Replacement Inducer Draft Motor for SNAP Supply, LLC’s 318984-753 Disconnect electrical power supply to the appliance remove the access panel to the HVAC System Remove motor from housing by removing all the screws holding it in place...
Installation Instructions – Replacement Dryer Thermostat Kit for SNAP Supply, LLC’s 279973 Disconnect electrical power supply to the appliance remove the access panel to on the bottom of the dryer Remove wires from the high limit thermostat and thermostat cut...
Installation Instructions – Replacement Dryer Heating Element for SNAP Supply, LLC’s products 279838 Generic instructions based on common refrigerator models Disconnect electrical power supply to the appliance Remove back panel off of the dryer by removing all the screws Find...
Installation Instructions – Replacement Dryer Gas Valve Coil Kit for SNAP Supply, LLC’s products 279834 Generic instructions based on common refrigerator models Disconnect electrical power supply to the appliance Lift up lint screen cover and remove screws. You need to...
Installation Instructions – Replacement Dishwasher Rack Wheel for SNAP Supply, LLC’s products 165314 Carefully grab and remove dishwasher rack from dishwasher Put it on a working space upside down Pull broken wheel off of dishrack axel Press new wheel on...
Installation Instructions – Replacement Igniter Kit for SNAP Supply, LLC’s WB2X9998 Disconnect electrical power supply to the range remove the access panel to on the rear of the stove to access the igniter Cut the leads of the defective igniter...
