Installation Instructions – Replacement Bake Element for SNAP Supply, LLC’s products 865940 Disconnect oven to avoid electrocution Open oven doors & remove racks Unscrew screws from old bake element Pull out bake element to disconnect wires Important when disconnecting wires...
Installation Instructions – Replacement Inducer Motor for SNAP Supply, LLC’s products 70-24157-03 Shut off power to furnace Slide upper access panel to remove Detach exhaust vent tube from outlet part of inducer Detach black vacuum tube form pressure switch Use...
Generic instructions based on common refrigerator models Disconnect electrical power supply to the appliance Remove console assembly and bring to a work space Carefully remove cold control knob Remove power tabs and unfasten cold control from console Unfasten the sensor...
Disconnect oven to avoid electrocution Remove access panel screws from back of oven with quarter inch nut driver With pliers remove wires from bake oven terminal Go to the front of oven and open door Remove oven racks For convenience...
Installation Instructions – Replacement Refrigerator Light Switch for SNAP Supply, LLC’s products 12002646 Start by turning your refrigerator off Using a putty knife slide it under the switch pry it out After pulling the switch out take a picture of...
Installation Instructions – Replacement Evaporator Motor for SNAP Supply, LLC’s WR60X10307 Disconnect electrical power supply to the appliance Remove the Freezer shelves Remove the back cover panel by removing all the screws If your model has an ice maker, carefully...
Installation Instructions – Replacement Evaporator Motor for SNAP Supply, LLC’s WR60X10141 Disconnect electrical power supply to the appliance remove the freezer air duct from the freezer Carefully pull the foam duct out of the opening Pull fan blade off of...
Installation Instructions – Replacement Knobs for SNAP Supply, LLC’s products Carefully grab the old knob and pull it off of the Appliance Take new knob and align the D shape shaft opening with the switch shaft and sternly push it...
Installation Instructions – Replacement Igniter Kit for SNAP Supply, LLC’s WB13K21 Disconnect electrical power supply to the range Remove the door by opening about 25% and pulling straight up Remove shelves remove bottom panel by removing the screws and pulling...
