WR60X10307 Evaporator Motor for GE

Use ctrl+F then enter your model number in search bar and hit enter

Installation Instructions for WR60X10307

1. Disconnect electrical power supply to the appliance
2. Remove the Freezer shelves
3. Remove the back cover panel by removing all the screws
   • If your model has an ice maker, carefully remove it first
4. Pull fan blade off of the motor shaft
5. Disconnect evaporator motor plug
6. Remove the pressure bracket by squeezing it
7. Secure the evaporator motor in the housing and put the bracket back in place
8. Connect the motor power plug.
9. Reinstall the back cover panel and then the ice maker.
10. Carefully install all of the shelves
11. Restore electrical power and test range refrigerator

Failure Symptoms: Poor cooling in both sections, but especially in the refrigerator section.

How to test: Measure voltage at the fan motor wire terminals using a multi meter. If voltage is present, the motor is faulty.
Often times, the fan blade may be manually turned, and it may continue slowly or start turning by itself. That is an accurate way to test without the use of a meter.

Repair Tip: Lubricating the motor almost never helps long term, the motor should be replaced. When installing the fan blade, make sure it is not pushed onto the motor shaft too far as it may bind and not turn smoothly.

Shipping Info

Same Day Shipping 

If you place your order between Monday - Friday before 3 p.m., your order will be shipped on that day. If you order on Saturday before 12 p.m., your order will be shipped on that day. If you place your order outside these times, call us at 1-802-727-4126 and we will do our best to get it out the door.

Quick Delivery, All Over The Country

We ship to 61% of the country in just 2 business days - See Shipping tab for more information!  Free shipping includes Saturday and Sunday delivery. 3-day delivery from the East Coast all the way to the Rocky Mountains and more!

We Stay On Top of It

We are using the most reliable options available. Even though all major carriers are experiencing delays, we are always happy to help. If you have a question about the status of your shipment, call us directly for the quickest response at 1-802-727-4126.

We’re Always Happy to Help

Our support team can be contacted via email at Suppot@snap.parts, or you can call us at 1-802-727-4126 during business hours. In the event that you need support outside of business hours, snap.parts has an instant message support chat that can help you solve any problem.

Description

The evaporator motor is found in the freezer compartment and is responsible for circulating the cold air from the evaporator coil throughout the entire unit. If the evaporator fan is not functioning correctly, it can cause the evaporator coils in the freezer to freeze over.

• Cross Reference Information
  WR60X10307, 1550741, PS2364950, WR60X10224, B004W6IL1S
• Includes the Wiring Harness and Thermistor
• Does not include Blade or Bracket
• Compatible with the following refrigerator brands: Kenmore, General Electric, Hotpoint.

Just because parts look the same does not mean that they are the same. Use the model numbers below to ensure that this part is compatible with your appliance! 

All Snap parts come with installation instructions to help you with your repair. If you need more help, you can always contact us for further assistance. Email us at support@snap.parts or give us a call at 1-877-269-0086.

Use ctrl+F then enter your model number in search bar and hit enter

Installation Instructions for WR60X10307

1. Disconnect electrical power supply to the appliance
2. Remove the Freezer shelves
3. Remove the back cover panel by removing all the screws
   • If your model has an ice maker, carefully remove it first
4. Pull fan blade off of the motor shaft
5. Disconnect evaporator motor plug
6. Remove the pressure bracket by squeezing it
7. Secure the evaporator motor in the housing and put the bracket back in place
8. Connect the motor power plug.
9. Reinstall the back cover panel and then the ice maker.
10. Carefully install all of the shelves
11. Restore electrical power and test range refrigerator

Failure Symptoms: Poor cooling in both sections, but especially in the refrigerator section.

How to test: Measure voltage at the fan motor wire terminals using a multi meter. If voltage is present, the motor is faulty.
Often times, the fan blade may be manually turned, and it may continue slowly or start turning by itself. That is an accurate way to test without the use of a meter.

Repair Tip: Lubricating the motor almost never helps long term, the motor should be replaced. When installing the fan blade, make sure it is not pushed onto the motor shaft too far as it may bind and not turn smoothly.

Snap Supply now offers wholesale.
Sign in 

Sign up

Items bought from Snap Supply can be returned within 30 days of receipt of shipment. Alterations to Snap Supply products is a violation of the return policy and will result in a nonrefundable product. To ensure your satisfaction with our products please contact us with any questions.

Click here for more about our Return Policy

Shipping can be expensive, that is why Snap Supply provides free shipping on all orders! No minimum order amounts, that force you to buy something you don't need. Order before 1 PM Eastern and it will ship that same day!

Buy with Confidence! Snap Supply Parts always come with a 1 Year Warranty.

Click here to learn more about our Warranty Policy