Skip to content
Use code SNAPFALL at checkout to save 10% on any order over $35
Use code SNAPFALL at checkout to save 10% on any order over $35

DC97-16782A 6602-001655 DC96-00882C Dryer Maintenance Kit (2) for Samsung

by PRYSM
Original price $0.00 - Original price $0.00
Original price $0.00
$63.23
$63.23 - $63.23
Current price $63.23

Same Day Shipping

Monday - Friday order before 3 p.m. If you place your order outside these times, call us at 1-802-727-4126 and we will do our best to get it out the door.

Delivery Time

Average delivery times range 1-3 days


Shipping Info

Same Day Shipping 

If you place your order between Monday - Friday before 3 p.m., your order will be shipped on that day. If you order on Saturday before 12 p.m., your order will be shipped on that day. If you place your order outside these times, call us at 1-802-727-4126 and we will do our best to get it out the door.

 

Quick Delivery, All Over The Country

 

We Stay On Top of It

We are using the most reliable options available. Even though all major carriers are experiencing delays, we are always happy to help. If you have a question about the status of your shipment, call us directly for the quickest response at 1-802-727-4126.

 

We’re Always Happy to Help

Our support team can be contacted via email at Suppot@snap.parts, or you can call us at 1-802-727-4126 during business hours. In the event that you need support outside of business hours, snap.parts has an instant message support chat that can help you solve any problem.

Description

Noisy dryer? With this dryer maintenance kit, you get everything you need to fix all the parts in your dryer that can cause unpleasant noises as they degrade over time. 

The kit contains:

  • Dryer belt
  • Idler pulley
  • 2 drum rollers

The dryer belt is fed through the idler pulley to rotate the dryer drum. If these parts are damaged, it can lead to excessive thumping noises. 

The wheels carry the dryer as it rotates. If even one of these wheels is worn out, it can throw the rotation out of alignment. This can lead to squealing or thumping noises.

Replacing each of these parts is common practice to prevent the dryer from breaking down again shortly after the repair.

 

  • This kit comes with 2 Dryer Rollers (DC97-16782A), 1 Dryer Belt (6602-001655) and 1 Idler Pulley (DC96-00882C).
  • Cross Reference Information for DC97-16782A (Dryer Roller):
    DC97-16782A, AP5325135, 2027851, DC97-07523A, DC97-07523B.
  • Cross Reference Information for 6602-001655 (Dryer Belt):
    935594, 6602-001314, PS4133825, B001KGX5G4, 6602-001655, AP4373659, 6602-001314, 1935594.
  • Cross Reference Infomation for DC96-00882C (Idler Pulley):
    DC96-00882C, DC96-00882B, PS11771601, B06XKB5FSL.
  • Quality you can Trust! All Snap Products are made with premium materials and are tested so they last.
  • Compatible with the following Dryer brands: Samsung

Just because parts look the same does not mean that they are the same. Use the model numbers below to ensure that this part is compatible with your appliance! 

All Snap parts come with installation instructions to help you with your repair. If you need more help, you can always contact us for further assistance. Email us at support@snap.parts or give us a call at 1-877-269-0086.

Model Numbers

 For DC97-16782A, click here then click on Model Numbers tab below the product pictures. 

 For 6602-001655, click here then click on Model Numbers tab below the product pictures. 

 For DC96-00882C, click here then click on Model Numbers tab below the product pictures. 

Installation Instructions

Installation Instructions

For DC97-16782A (Drum Roller): 

  1. Unplug appliance and/or turn off circuit breakers to prevent electrocution.
  2. Remove screws securing the top panel. Remove the top panel by pulling then lifting. Set aside.
  3. Remove locking tabs securing the control panel, disconnect wire harness and set aside.
  4. Open dryer door and remove the two screws at the bottom. Remove the upper four screws that secure the front panel. Grab front panel and lift to release it from the two locking tabs. Disconnect the door switch wire harness. Release it from the three mounting brackets from the bottom.
  5. Remove the panel that holds the control panel by unscrewing the screws. Disconnect the light bulb wire harness and release it from the plastic retainer. Slightly pull panel and have it at an angle, release the wire harnesses from the plastic retainers, set aside.
  6. Next, is removing the bulk head from the blower housing by unscrewing the screw. Then, disconnect the moisture sensor wire harness on the other side.
  7. Remove the four screws that secure the bulk head to the cabinet, lift front bulk head off the cabinet. There are two rollers on the front bulk head, if those are the ones that have to be changed then continue to step 11. If the ones on the back of the drum are the ones that have to be changed then continue to step 8.
  8. Reach in on the drum on each side, grab the idler pulley, pull it toward the outside of the machine to release the tension of the belt. Lift the belt to guide the drum out of the machine.
  9. Next, remove the heating element of the dryer. On the left side of the dryer there is a water valve, using a wrench remove the water valve that is connected to the steam sprayer. Be sure to place a towel underneath.
  10. On the upper left-hand side of the dryer there is a wire harness to remove from the plastic retainer clips, remove the six screws securing the bulk head. Lift the rear bulk head off the mounting tabs and set aside for replacement.
  11. To replace the roller that has the lint filter duct right behind it, take a wrench instead of a socket to reach in to take the nut off and with an 8 mm socket hold down the shaft at the same time. For the others, use a 17 mm socket on the back side and on the front hold it down with an 8 mm socket and snap it out. Be careful not to lose any pieces.
  12. To install the new rollers, place the metal washer first then, place the new roller, and then place the other metal washer first then the nut on the other side and tighten with 8 mm socket on top and 17 mm socket on the bottom. Install any new rollers needing to install.
  13. ­­If you only had to change the rollers on the front bulk head then continue to step ­­15. 
    If you had to change the rollers on the rear of the machine, carefully replace the rear bulk head, hook into tabs, reconnect wire harness into the plastic retainer clips, replace screws. Reattach water valve hose. Reposition heating element and secure with screw.
  1. Place drum back into the machine by guiding it with the belt. Set the belt in place making sure the ridges are facing the drum. Reach in to route the belt through the pulleys. Grab the idler pulley and pull it toward the outside of the machine. Then, place the belt on the idler pulley.
  2. Place the front bulk head by locking it in the tabs of the left side of machine, align the drum with the front bulk head making sure the drum goes over the rollers. Secure it in the locking tabs on the other side. Replace all screws along with the blower housing screw.
  3. Reconnect moisture sensor wire harness. Replace the wire harnesses in the plastic retainer clips. Reconnect the light bulb wire harness. The door switch wire harness will be connected after control panel is replaced.
  4. Reattach the front panel, replace the wire harnesses onto the plastic retainer clips. Make sure the front panel goes in the locking tabs. Secure with screws.
  5. Reconnect door switch wire harness. Place front panel on making sure it is locked in the locking tabs. Secure with screws. Open door to replace screws.
  6. Then, reattach the control panel by first reconnecting the wire harness then placing the panel on the locking tabs and then snapping it into place. Reattach the top panel and secure it with screws.
  7. Plug in appliance and installation is complete.
    Tools Needed:
  • Screwdriver
  • Wrench
  • 17mm socket
  • 8mm socket

For 6602-001655 (Dryer Belt): 

  1. Unplug appliance and/or turn off circuit breakers to prevent electrocution.
  2. Remove screws securing the top panel. Remove the top panel by pulling then lifting. Set aside.
  3. Remove locking tabs securing the control panel, disconnect wire harness and set aside.
  4. Open dryer door and remove the two screws at the bottom. Remove the upper four screws that secure the front panel. Grab front panel and lift to release it from the two locking tabs. Disconnect the door switch wire harness. Release it from the three mounting brackets from the bottom.
  5. Remove the panel that holds the control panel by unscrewing the screws. Disconnect the light bulb wire harness and release it from the plastic retainer. Slightly pull panel and have it at an angle, release the wire harnesses from the plastic retainers, set aside.
  6. Next, is removing the bulk head from the blower housing by unscrewing the screw. Then, disconnect the moisture sensor wire harness on the other side.
  7. Remove the four screws that secure the bulk head to the cabinet, lift front bulk head off the cabinet and set aside.
  8. Next, reach in on the drum on each side, grab the idler pulley, pull it toward the outside of the machine to release the tension of the belt. Once done, slightly lift the drum and remove the belt off.
  9. To replace the drum belt, slightly lift the drum and place in the new belt. Set the belt in place making sure the ridges are facing the drum. Reach in to route the belt through the pulleys. Grab the idler pulley and pull it toward the outside of the machine. Then, place the belt on the idler pulley.
  10. Next, place the front bulk head by locking it in the tabs of the left side of machine, align the drum with the front bulk head making sure the drum goes over the rollers. Secure it in the locking tabs on the other side. Replace all screws along with the blower housing screw.
  11. Reconnect moisture sensor wire harness. Replace the wire harnesses in the plastic retainer clips. Reconnect the light bulb wire harness. The door switch wire harness will be connected after control panel is placed.
  12. Reattach the front panel, replace the wire harnesses onto the plastic retainer clips. Make sure the front panel goes in the locking tabs. Secure with screws.
  13. Reconnect door switch wire harness. Place front panel on making sure it is locked in the locking tabs. Secure with screws. Open door to replace screws.
  14. Then, reattach the control panel by first reconnecting the wire harness then placing the panel on the locking tabs and then snapping it into place. Reattach the top panel and secure it with screws.
  15. Plug in appliance and installation is complete.
    Tools Needed:
  • Screwdriver

For DC96-00882C (Idler Pulley):

  1. Unplug appliance and/or turn off circuit breakers to prevent electrocution.
  2. Remove screws securing the top panel, pull and lift, set aside.
  3. To remove the console, there are three locking tabs on the top needed to release, lift each to release. Release locking tab of wire harness, pull the panel and set aside.
  4. Open dryer door and remove the two screws at the bottom. Remove the upper four screws that secure the front panel. Grab front panel and lift to release it from the two locking tabs. Disconnect the door switch wire harness. Release it from the three mounting brackets from the bottom.
  5. Remove the panel that holds the control panel by unscrewing the screws. Disconnect the light bulb wire harness and release it from the plastic retainer. Slightly pull panel and have it at an angle, release the wire harnesses from the plastic retainers, set aside.
  6. Next, is removing the bulk head from the blower housing by unscrewing the screw. Then, disconnect the moisture sensor wire harness on the other side.
  7. Remove the four screws that secure the bulk head to the cabinet, lift front bulk head off the cabinet.
  8. Reach in on the drum on each side, grab the idler pulley, pull it toward the outside of the machine to release the tension of the belt. Lift the belt to guide the drum out of the machine.
  9. To remove the idler pulley, remove the spring that places tension onto it by sliding it downward. Remove the screw that holds the idler assembly. Remove the old assembly.
  10. To place in the new idler pulley, align the tab in the slot, align the holes and replace screws. Replace the spring. Make sure there is tension onto the pulley.
  11. Place drum back into the machine by guiding it with the belt. Set the belt in place making sure the ridges are facing the drum. Reach in to route the belt through the pulleys. Grab the idler pulley and pull it toward the outside of the machine. Then, place the belt on the idler pulley.
  12. Place the front bulk head by locking it in the tabs of the left side of machine, align the drum with the front bulk head making sure the drum goes over the rollers. Secure it in the locking tabs on the other side. Replace all screws along with the blower housing screw.
  13. Reconnect moisture sensor wire harness. Replace the wire harnesses in the plastic retainer clips. Reconnect the light bulb wire harness. The door switch wire harness will be connected after control panel is replaced.
  14. Reattach the console, replace the wire harnesses onto the plastic retainer clips. Make sure the front panel goes in the locking tabs. Secure with screws. Reconnect door switch wire harness. Place front panel on making sure it is locked in the locking tabs. Secure with screws. Open door to replace screws.
  15. Then, reattach the control panel by first reconnecting the wire harness then placing the panel on the locking tabs and then snapping it into place. Reattach the top panel and secure it with screws.
  16. Plug in appliance and the dryer is set to go!
    Tools Needed:
  • Screwdriver
  • Small flat head screwdriver

Shipping

Wholesale

Snap Supply now offers wholesale.
Sign in 

Sign up

Return Policy

Items bought from Snap Supply can be returned within 30 days of receipt of shipment. Alterations to Snap Supply products is a violation of the return policy and will result in a nonrefundable product. To ensure your satisfaction with our products please contact us with any questions.

Click here for more about our Return Policy

Free Shipping

Shipping can be expensive, that is why Snap Supply provides free shipping on all orders! No minimum order amounts, that force you to buy something you don't need. Order before 1 PM Eastern and it will ship that same day!

Warranty

Buy with Confidence! Snap Supply Parts always come with a 1 Year Warranty.

Click here to learn more about our Warranty Policy

Request a quote