Skip to content
Order By 3 PM CST For Same Day Fulfillment!
Order By 3 PM CST For Same Day Fulfillment!

DC47-00019A Dryer Element for Samsung

by PRYSM
$37.98
SKU DC47-00019A

Note:

If you are replacing your dryer element, thermal fuse or thermostat because your dryer is having trouble heating up, we recommend replacing the dryer element, thermal fuse and the thermostat. 

Click here to take a look at dryer element and thermostat kits, which include the thermal fuse.

 

Shipping Info

Same Day Shipping 

If you place your order between Monday - Friday before 3 p.m., your order will be shipped on that day. If you order on Saturday before 12 p.m., your order will be shipped on that day. If you place your order outside these times, call us at 1-802-727-4126 and we will do our best to get it out the door.

 

Quick Delivery, All Over The Country

We ship to 61% of the country in just 2 business days - See Shipping tab for more information!  Free shipping includes Saturday and Sunday delivery. 3-day delivery from the East Coast all the way to the Rocky Mountains and more!

 

We Stay On Top of It

We are using the most reliable options available. Even though all major carriers are experiencing delays, we are always happy to help. If you have a question about the status of your shipment, call us directly for the quickest response at 1-802-727-4126.


We’re Always Happy to Help

Our support team can be contacted via email at Suppot@snap.parts, or you can call us at 1-802-727-4126 during business hours. In the event that you need support outside of business hours, snap.parts has an instant message support chat that can help you solve any problem.

Description

Need a new dryer element? It might need to be replaced in the event that your dryer is not fully drying clothes. Maybe it is taking longer than usual for your clothes to dry - or maybe they're still wet when the dry cycle is finished! If that is the case, your dryer element might need to be replaced!

  • Cross Reference Information
    DC47-00019A, 35001247, 35001119, AP4045884, 1185561, AH2038533, EA2038533, PS2038533, ERDC47-00019A.
  • Quality you can Trust! All Snap Products are made with premium materials and are tested so they last.
  • Click here for installation instructions!
  • Compatible with the following Dryer brands: Samsung

Just because parts look the same does not mean that they are the same. Use the model numbers below to ensure that this part is compatible with your appliance! 

All Snap parts come with installation instructions to help you with your repair. If you need more help, you can always contact us for further assistance. Email us at support@snap.parts or give us a call at 1-877-269-0086.

Model Numbers

Use ctrl+F then enter your model number in search bar and hit enter

MDE6700AYW
MDE6700AZW
MDG6700AWM
MDG6700AWW
NED7200TW10
YIED7200TW10

Installation Instructions

Installation Instructions for DC47-00019A

Tools Needed

  • Pliers
  • Flat nose screwdriver
  1. Disconnect dryer to avoid electrocution
  2. Remove the screws from the back of the dryer that secure the top panel
  3. Slide panel back and remove top to set aside
  4. Carefully remove the control panel from the top
  5. Disconnect the wire harness and set panel aside
  6. Remove screws on top securing the front panel
  7. Open your dryer door and remove the two remaining mounting screws
  8. Use flat nose screwdriver to unlock the locking tabs located on top
  9. Pull the front panel forward
  10. Disconnect the door switch panel & lift off
  11. Set aside the panel
  12. Disconnect the moisture sensor wires located at the bottom of the dryer
  13. Remove the screws securing the heating element housing
  14. Remove the housing from the bracket by pulling up
  15. Remove the screws securing the bracket to the base
  16. Take both the bracket and the heating element housing out
  17. Note the wires and disconnect them
  18. Using a screwdriver unscrew the high limit thermostat & thermal limit from housing
  19. Remove screws securing the housing
  20. With pliers pull the retaining tab up
  21. Separate the housing
  22. Use pliers to straighten the wire locking tabs and pull them out
  23. Remove old dryer element and set aside
  24. Take new SNAP Supply Dryer Element out and place it in the housing
  25. Insert terminal wires in the locking tabs and bend them slightly to lock
  26. Rejoin the two halves of the housing element by inserting the tabs into the slots
  27. Use pliers to bend the inner tabs
  28. Align the tabs with the housing using the screw holes & screw into place
  29. Reposition the high limit thermostat and thermal limit to housing
  30. Replace the screws
  31. Connect the heating wires to the terminals
  32. Return the housing to the dryer
  33. Reposition the bracket by placing the slots into the base of the dryer
  34. Secure using the screws
  35. Reposition the heating housing by inserting the element into the bulkhead
  36. Align the front tab to the bracket
  37. Secure using screws
  38. Reconnect the moisture sensor wires
  39. Replace the front panel and connect wire to the door switch
  40. Replace mounting screws
  41. Reconnect the wire harness to the control panel
  42. Align tabs on bottom and snap panel into place
  43. Slide the top panel into place
  44. Use screws to secure into place
  45. Connect dryer outlet and begin using

Shipping

  • Cross Reference Information
    DC47-00019A, 35001247, 35001119, AP4045884, 1185561, AH2038533, EA2038533, PS2038533, ERDC47-00019A.
  • Quality you can Trust! All Snap Products are made with premium materials and are tested so they last.
  • Click here for installation instructions!
  • Compatible with the following Dryer brands: Samsung

Just because parts look the same does not mean that they are the same. Use the model numbers below to ensure that this part is compatible with your appliance! 

All Snap parts come with installation instructions to help you with your repair. If you need more help, you can always contact us for further assistance. Email us at support@snap.parts or give us a call at 1-877-269-0086.

Model Numbers

Use ctrl+F then enter your model number in search bar and hit enter

MDE6700AYW
MDE6700AZW
MDG6700AWM
MDG6700AWW
NED7200TW10
YIED7200TW10

Installation Instructions

Installation Instructions for DC47-00019A

Tools Needed

  • Pliers
  • Flat nose screwdriver
  1. Disconnect dryer to avoid electrocution
  2. Remove the screws from the back of the dryer that secure the top panel
  3. Slide panel back and remove top to set aside
  4. Carefully remove the control panel from the top
  5. Disconnect the wire harness and set panel aside
  6. Remove screws on top securing the front panel
  7. Open your dryer door and remove the two remaining mounting screws
  8. Use flat nose screwdriver to unlock the locking tabs located on top
  9. Pull the front panel forward
  10. Disconnect the door switch panel & lift off
  11. Set aside the panel
  12. Disconnect the moisture sensor wires located at the bottom of the dryer
  13. Remove the screws securing the heating element housing
  14. Remove the housing from the bracket by pulling up
  15. Remove the screws securing the bracket to the base
  16. Take both the bracket and the heating element housing out
  17. Note the wires and disconnect them
  18. Using a screwdriver unscrew the high limit thermostat & thermal limit from housing
  19. Remove screws securing the housing
  20. With pliers pull the retaining tab up
  21. Separate the housing
  22. Use pliers to straighten the wire locking tabs and pull them out
  23. Remove old dryer element and set aside
  24. Take new SNAP Supply Dryer Element out and place it in the housing
  25. Insert terminal wires in the locking tabs and bend them slightly to lock
  26. Rejoin the two halves of the housing element by inserting the tabs into the slots
  27. Use pliers to bend the inner tabs
  28. Align the tabs with the housing using the screw holes & screw into place
  29. Reposition the high limit thermostat and thermal limit to housing
  30. Replace the screws
  31. Connect the heating wires to the terminals
  32. Return the housing to the dryer
  33. Reposition the bracket by placing the slots into the base of the dryer
  34. Secure using the screws
  35. Reposition the heating housing by inserting the element into the bulkhead
  36. Align the front tab to the bracket
  37. Secure using screws
  38. Reconnect the moisture sensor wires
  39. Replace the front panel and connect wire to the door switch
  40. Replace mounting screws
  41. Reconnect the wire harness to the control panel
  42. Align tabs on bottom and snap panel into place
  43. Slide the top panel into place
  44. Use screws to secure into place
  45. Connect dryer outlet and begin using

Shipping

--amp.product-description.end-->

Wholesale

Snap Supply now offers wholesale.
Sign in 

Sign up

Return Policy

Items bought from Snap Supply can be returned within 30 days of receipt of shipment. Alterations to Snap Supply products is a violation of the return policy and will result in a nonrefundable product. To ensure your satisfaction with our products please contact us with any questions.

Click here for more about our Return Policy

Free Shipping

Shipping can be expensive, that is why Snap Supply provides free shipping on all orders! No minimum order amounts, that force you to buy something you don't need. Order before 1 PM Eastern and it will ship that same day!

Warranty

Buy with Confidence! Snap Supply Parts always come with a 1 Year Warranty.

Click here to learn more about our Warranty Policy

Trustpilot

Map Data
Map data ©2019
Map DataMap data ©2019
Map data ©2019

Location

1835 Wallace Ave.
St. Charles, Illinois 60174
Monday - Friday
Order by 2pm, ships same day, for free!
Pick-up between 9 am - 5 pm