Skip to content

5220FR2008F Water Valve for LG

by PRYSM
Save 29%
Original price $45.00
Current price $31.99
SKU 5220FR2008F

Description

  • Cross Reference Information
    1268512, 5220FR2008L, 5221ER1002B, AH3527431, EA3527431, PS3527431, B00AUDAF5M
  • Quality you can Trust! All Snap Products are made with premium materials and are tested so they last.
  • Click here for installation instructions!
  • Compatible with the following Washer brands: LG

Model Numbers

Use ctrl+F then enter your model number in search bar and hit enter

79640441900
79640448900
79641022900
79641028900
79641029900
79641542110
79641548110
79641549110
79642192900
79642198900
79642199900
WM0001HTM
WM0001HTMA (ASTEEUS)
WM2450HRA
WM2487HRM (ACREEUS)
WM2487HRMA (ACREEUS)
WM2487HWM (ABWEEUS)
WM2487HWMA (ABWEEUS)
WM2487WHM
WM2497HWM
WM2501HVA
WM2501HWA
WM2688HNM (ANBEEUS)
WM2688HNMA (ANBEEUS)
WM2688HWM (ABWEEUS)
WM2688HWMA (ABWEEUS)
WM2801HLA (ARBEEUS)
WM2801HRA (ACREEUS)
WM2801HWA (ABWEEUS)
WM2901HVA
WM3001HPA (APTEEUS)
WM3001HRA (ACREEUS)
WM3001HWA (ABWEEUS)
WM3360HRCA
WM3360HVCA
WM3360HWCA
WM3550HVCA
WM3550HWCA

Installation Instructions

Installation Instructions for 5220FR2008F

Tools Needed:

  • Screwdriver
  • Flat end screwdriver
  • Pliers
  1. Unplug appliance and/or turn off circuit breakers to prevent electrocution.
  2. Turn off water supply from washer
  3. With a pair of pliers, unscrew the cold-water inlet hose. Be careful as water may fall out, a towel is recommended.
  4. With a screwdriver, remove the two lower bracket screws, pull back the top panel and lift off the washer. Taking a picture is recommended to know how the hose and plugs are installed.
  5. Remove the four plugs with flat head screwdriver, remove the wire harness from the clips, with pliers slide the hose clamps, place towel under water valve and with flat head screwdriver remove the hose.
  6. Remove the two screws holding the valve and remove the valve.
  7. To install the new water valve, secure it with two screws.
  8. Install the four hoses and secure the hoses with pliers, remove the towel.
  9. Connect the wire plugs and place the wire harness into the clips.
  10. Place top panel on, push it in and secure it with screws.
  11. Install the water inlet hose and tighten it with pliers. Be careful not to tighten it too much as it may cause a leak.
  12. Turn water supply back on, plug appliance back in and appliance is set to go!

 

    Description

    • Cross Reference Information
      1268512, 5220FR2008L, 5221ER1002B, AH3527431, EA3527431, PS3527431, B00AUDAF5M
    • Quality you can Trust! All Snap Products are made with premium materials and are tested so they last.
    • Click here for installation instructions!
    • Compatible with the following Washer brands: LG

    Model Numbers

    Use ctrl+F then enter your model number in search bar and hit enter

    79640441900
    79640448900
    79641022900
    79641028900
    79641029900
    79641542110
    79641548110
    79641549110
    79642192900
    79642198900
    79642199900
    WM0001HTM
    WM0001HTMA (ASTEEUS)
    WM2450HRA
    WM2487HRM (ACREEUS)
    WM2487HRMA (ACREEUS)
    WM2487HWM (ABWEEUS)
    WM2487HWMA (ABWEEUS)
    WM2487WHM
    WM2497HWM
    WM2501HVA
    WM2501HWA
    WM2688HNM (ANBEEUS)
    WM2688HNMA (ANBEEUS)
    WM2688HWM (ABWEEUS)
    WM2688HWMA (ABWEEUS)
    WM2801HLA (ARBEEUS)
    WM2801HRA (ACREEUS)
    WM2801HWA (ABWEEUS)
    WM2901HVA
    WM3001HPA (APTEEUS)
    WM3001HRA (ACREEUS)
    WM3001HWA (ABWEEUS)
    WM3360HRCA
    WM3360HVCA
    WM3360HWCA
    WM3550HVCA
    WM3550HWCA

    Installation Instructions

    Installation Instructions for 5220FR2008F

    Tools Needed:

    • Screwdriver
    • Flat end screwdriver
    • Pliers
    1. Unplug appliance and/or turn off circuit breakers to prevent electrocution.
    2. Turn off water supply from washer
    3. With a pair of pliers, unscrew the cold-water inlet hose. Be careful as water may fall out, a towel is recommended.
    4. With a screwdriver, remove the two lower bracket screws, pull back the top panel and lift off the washer. Taking a picture is recommended to know how the hose and plugs are installed.
    5. Remove the four plugs with flat head screwdriver, remove the wire harness from the clips, with pliers slide the hose clamps, place towel under water valve and with flat head screwdriver remove the hose.
    6. Remove the two screws holding the valve and remove the valve.
    7. To install the new water valve, secure it with two screws.
    8. Install the four hoses and secure the hoses with pliers, remove the towel.
    9. Connect the wire plugs and place the wire harness into the clips.
    10. Place top panel on, push it in and secure it with screws.
    11. Install the water inlet hose and tighten it with pliers. Be careful not to tighten it too much as it may cause a leak.
    12. Turn water supply back on, plug appliance back in and appliance is set to go!

     

      --amp.product-description.end-->

      Return Policy

      Items bought from Snap Supply can be returned within 30 days of receipt of shipment. Alterations to Snap Supply products is a violation of the return policy and will result in a nonrefundable product. To ensure your satisfaction with our products please contact us with any questions.

      Click here for more about our Return Policy

      Free Shipping

      Shipping can be expensive, that is why Snap Supply provides free shipping on all orders! No minimum order amounts, that force you to buy something you don't need. Order before 1 PM Eastern and it will ship that same day!

      Warranty

      Buy with Confidence! Snap Supply Parts always come with a 1 Year Warranty.

      Click here to learn more about our Warranty Policy

      Trustpilot

      Map Data
      Map data ©2019
      Map DataMap data ©2019
      Map data ©2019

      Location

      1835 Wallace Ave.
      St. Charles, Illinois 60174
      Monday - Friday
      Order by 2pm, ships same day, for free!
      Picku-up between 9 am - 5 pm