70-24157-03 Inducer Motor Blower for Rheem

Installation Instructions for 70-24157-03

1. Shut off power to furnace
2. Slide upper access panel to remove
3. Detach exhaust vent tube from outlet part of inducer
4. Detach black vacuum tube form pressure switch
5. Use flat head screwdriver to detach mounting bracket pressure switch screws
6. Move bracket out of the way
7. Note the motor wires and disconnect them
8. Unthread assembly mounting screws on old motor
9. Carefully remove old motor and set aside
10. Take new SNAP Supply Inducer Motor out and install it
11. Replace screw to secure motor into place
12. Connect wires
13. Reposition the pressure switch and mounting bracket
14. Replace pressure switch screws
15. Connect new vacuum tube to pressure switch
16. Position the exhaust bent tube onto outlet port of the new motor
17. Replace access panel
18. Turn power switch on & done!

Items bought from Snap Supply can be returned within 30 days of receipt of shipment. Alterations to Snap Supply products is a violation of the return policy and will result in a nonrefundable product. To ensure your satisfaction with our products please contact us with any questions.

Click here for more about our Return Policy

Shipping can be expensive, that is why Snap Supply provides free shipping on all orders! No minimum order amounts, that force you to buy something you don't need. Order before 1 PM Eastern and it will ship that same day!

Buy with Confidence! Snap Supply Parts always come with a 1 Year Warranty.

Click here to learn more about our Warranty Policy