Monday - Friday order before 3 p.m. If you place your order outside these times, call us at 1-802-727-4126 and we will do our best to get it out the door.
If you place your order between Monday - Friday before 3 p.m., your order will be shipped on that day. If you order on Saturday before 12 p.m., your order will be shipped on that day. If you place your order outside these times, call us at 1-802-727-4126 and we will do our best to get it out the door.
Quick Delivery, All Over The Country
We ship to 61% of the country in just 2 business days - See Shipping tab for more information! Free shipping includes Saturday and Sunday delivery. 3-day delivery from the East Coast all the way to the Rocky Mountains and more!
We Stay On Top of It
We are using the most reliable options available. Even though all major carriers are experiencing delays, we are always happy to help. If you have a question about the status of your shipment, call us directly for the quickest response at 1-802-727-4126.
We’re Always Happy to Help
Our support team can be contacted via email at Suppot@snap.parts, or you can call us at 1-802-727-4126 during business hours. In the event that you need support outside of business hours, snap.parts has an instant message support chat that can help you solve any problem.
Description
Need a new dryer element? It might need to be replaced in the event that your dryer is not fully drying clothes. Maybe it is taking longer than usual for your clothes to dry - or maybe they're still wet when the dry cycle is finished! If that is the case, your dryer element might need to be replaced!
Compatible with the following Dryer brands: Samsung
Just because parts look the same does not mean that they are the same. Use the model numbers below to ensure that this part is compatible with your appliance!
All Snap parts come with installation instructions to help you with your repair. If you need more help, you can always contact us for further assistance. Email us at support@snap.parts or give us a call at 1-877-269-0086.
Model Numbers
Use ctrl+F then enter your model number in search bar and hit enter
MDE6700AYW
MDE6700AZW
MDG6700AWM
MDG6700AWW
NED7200TW10
YIED7200TW10
Installation Instructions
Installation Instructions for DC47-00019A
Tools Needed
Pliers
Flat nose screwdriver
Disconnect dryer to avoid electrocution
Remove the screws from the back of the dryer that secure the top panel
Slide panel back and remove top to set aside
Carefully remove the control panel from the top
Disconnect the wire harness and set panel aside
Remove screws on top securing the front panel
Open your dryer door and remove the two remaining mounting screws
Use flat nose screwdriver to unlock the locking tabs located on top
Pull the front panel forward
Disconnect the door switch panel & lift off
Set aside the panel
Disconnect the moisture sensor wires located at the bottom of the dryer
Remove the screws securing the heating element housing
Remove the housing from the bracket by pulling up
Remove the screws securing the bracket to the base
Take both the bracket and the heating element housing out
Note the wires and disconnect them
Using a screwdriver unscrew the high limit thermostat & thermal limit from housing
Remove screws securing the housing
With pliers pull the retaining tab up
Separate the housing
Use pliers to straighten the wire locking tabs and pull them out
Remove old dryer element and set aside
Take new SNAP Supply Dryer Element out and place it in the housing
Insert terminal wires in the locking tabs and bend them slightly to lock
Rejoin the two halves of the housing element by inserting the tabs into the slots
Use pliers to bend the inner tabs
Align the tabs with the housing using the screw holes & screw into place
Reposition the high limit thermostat and thermal limit to housing
Replace the screws
Connect the heating wires to the terminals
Return the housing to the dryer
Reposition the bracket by placing the slots into the base of the dryer
Secure using the screws
Reposition the heating housing by inserting the element into the bulkhead
Align the front tab to the bracket
Secure using screws
Reconnect the moisture sensor wires
Replace the front panel and connect wire to the door switch
Items bought from Snap Supply can be returned within 30 days of receipt of shipment. Alterations to Snap Supply products is a violation of the return policy and will result in a nonrefundable product. To ensure your satisfaction with our products please contact us with any questions.
Shipping can be expensive, that is why Snap Supply provides free shipping on all orders! No minimum order amounts, that force you to buy something you don't need. Order before 1 PM Eastern and it will ship that same day!
Warranty
Buy with Confidence! Snap Supply Parts always come with a 1 Year Warranty.