Description

Description

• Cross Reference Information
  2578, AH310858, EA310858, PS310858, WR09X0427, WR09X0469, WR09X0488, WR09X0489, WR9X427, WR9X469, WR9X488, B003BIGDJU, B003BIGDJU. 
  
• Quality you can Trust! All Snap Products are made with premium materials and are tested so they last.
• Compatible with the following Refrigerator brands:  General Electric, Hotpoint, RCA, and others

Model Numbers

Use ctrl+F then enter your model number in search bar and hit enter

Installation Instructions

Installation Instructions for WR9X489

Installation Instructions – Replacement Defrost Timer for SNAP Supply, LLC’s products WR9X489

Tools Needed:

Phillips Head Screwdriver

Flathead Screwdriver

Nut Driver

1. Unplug your refrigerator.
2. Open the refrigerator door, begin pulling the control panel off by first removing the 2 dials.
3. Pull the cover of the control panel off by lifting up, pull out the lightbulb as well.
4. Unscrew the upper nut holding the assembly in place.
5. Lift the control module up and then pull out of place.
6. On the right side of the control module, remove the 2 bolts to the farthest right to release the defrost timer.
7. Pull out and unplug the defrost timer
8. Replace with the new timer, plug it in with the disconnected cable
9. Screw the defrost timer back in with the 2 screws on the right of the control module.
10. Put the control module back into place making sure to engage the locking tabs
11. Screw the module back into place with the bolt on top
12. Screw the lightbulb back in
13. Replace the front cover by dropping it down onto its retention channels
14. Replace dials by pushing them back into place
15. Close refrigerator door, plug refrigerator back in.