8544771 Dryer Element for Whirlpool

$27.40
SKU 8544771

Description

  • Cross Reference Information
    WP8544771, 8544771, 1180054, AH990361, EA990361, PS990361, AP3866035.
  • Quality you can Trust! All Snap Products are made with premium materials and are tested so they last.
  • Click here for installation instructions!
  • Compatible with the following Dryer brands: Compatible with the following Dryer brands: Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others.

Model Numbers

Use ctrl+F then enter your model number in search bar and hit enter

YWED80HEBW0 WED85HEFC0 MED7000XW0 11067032600
YWED8300SB0 WED85HEFW0 MED7000XW1 11067032601
YWED8300SB1 WED86HEBC0 MED7000XW2 11067042600
YWED8300SW0 WED86HEBW0 MED7100DC1 11067042601
YWED8300SW1 WED8740DC1 MED7100DW1 11067052600
YWED8500SR0 WED8740DW1 MED8000AG0 11068062800
YWED8500SR1 WED87HEDC1 MED8000AW0 11068062801
YWED86HEBC0 WED87HEDW1 MED8100DC1 11068072800
YWED86HEBW0 WED9050XW1 MED8100DW1 11068072801
YWED9050XW1 WED90HEFC0 MED8150EW0 11068082701
YWED9050XW2 WED90HEFW0 MED8200FC0 11068087701
YWED9150WW1 WED9150WW1 MED8200FW0 11068092700
YWED9151YW0 WED9151YW0 MED9000YG0 11068092701
YWED9151YW1 WED9151YW1 MED9000YG1 11068097701
YWED9200SQ0 WED9200SQ0 MED9000YG2 11068103310
YWED9200SQ1 WED9200SQ1 MED9000YR0 11086562500
YWED9200SQ2 WED9200SQ2 MED9000YR1 11086562501
YWED9250WL1 WED9250WL1 MED9000YW0 11086572500
YWED9250WL2 WED9250WR1 MED9000YW1 11086572501
YWED9250WR1 WED9250WW1 MED9000YW2 11086742700
YWED9250WR2 WED9270XL1 MEDB200VQ0 11086742701
YWED9250WW1 WED9270XL2 MEDB200VQ1 11086742702
YWED9250WW2 WED9270XR1 MEDB400VQ0 11086747700
YWED9270XL1 WED9270XR2 MEDB400VQ1 11086747701
YWED9270XL2 WED9270XW1 MEDB700VQ0 11086747702
YWED9270XR1 WED9270XW2 MEDB725BW0 11086757701
YWED9270XR2 WED92HEFBD0 MEDB750YW0 11086762700
YWED9270XW1 WED92HEFC0 MEDB750YW1 11086762701
YWED9270XW2 WED92HEFU0 MEDB800VB0 11087081601
YWED9300VU0 WED92HEFW0 MEDB800VQ0 11087081602
YWED9300VU1 WED9300VU0 MEDB800VU0 11087086601
YWED9371YL0 WED9300VU1 MEDB850WB0 11087086602
YWED9371YL1 WED9371YL0 MEDB850WB1 11087087601
YWED9371YW0 WED9371YW0 MEDB850WL0 11087087602
YWED9371YW1 WED9371YW1 MEDB850WL1 11087088601
YWED9400SU0 WED9400SB0 MEDB850WQ0 11087088602
YWED9400SU1 WED9400SB1 MEDB850WQ1 11087089601
YWED9400SU2 WED9400ST0 MEDB850WR0 11087089602
YWED9400SW0 WED9400ST1 MEDB850WR1 11087091601
YWED9400SW1 WED9400SU0 MEDB850YG0 11087511701
YWED9400SW2 WED9400SU1 MEDB850YG1 11087531701
YWED9400SZ0 WED9400SU2 MEDB850YG2 11087561601
YWED9400SZ1 WED9400SW0 MEDB850YW0 11087561602
YWED9400VE0 WED9400SW1 MEDB850YW2 11087562601
YWED9400VE1 WED9400SW2 MEDB880BW0 11087562602
YWED9450WL0 WED9400SZ0 MEDB950YG0 11087566601
YWED9450WL1 WED9400SZ1 MEDB950YG1 11087566602
YWED9450WR0 WED9400SZ2 MEDB950YG2 11087567700
YWED9450WR1 WED9400VE0 MEDB950YW0 11087571601
YWED9450WW0 WED9400VE1 MEDB950YW1 11087571602
YWED9450WW1 WED9450WL0 MEDB950YW2 11087572601
YWED9470WL1 WED9450WL1 MEDB980BG0 11087572602
YWED9470WR1 WED9450WR0 MEDB980BW0 11087576601
YWED9470WW1 WED9450WR1 MEDE200XW1 11087576602
YWED9500TC1 WED9450WW0 MEDE201YW0 11087577700
YWED9500TU0 WED9450WW1 MEDE201YW1 11087581601
YWED9500TU1 WED9470WL1 MEDE251YG0 11087582601
YWED9550WL0 WED9470WR1 MEDE251YG1 11087701700
YWED9550WL1 WED9470WW1 MEDE251YL0 11087701701
YWED9550WL2 WED9470WW2 MEDE251YL1 11087709700
YWED9550WR0 WED9500TC0 MEDE300VF0 11087709701
YWED9550WR1 WED9500TC1 MEDE300VF1 11087721700
YWED9550WW0 WED9500TC2 MEDE300VF2 11087721701
YWED9550WW1 WED9500TU0 MEDE300VW0 11087721702
YWED9550WW2 WED9500TU1 MEDE300VW1 11087727701
YWED9600TA0 WED9500TW0 MEDE301YG0 11087727702
YWED9600TA1 WED9500TW1 MEDE301YW0 11087728701
YWED9600TA2 WED9500TW2 MEDE400XR0 11087728702
YWED9600TB0 WED9500TW3 MEDE400XW0 11087729700
YWED9600TB1 WED9550WL0 MEDE500VF0 11087729701
YWED9600TU0 WED9550WL1 MEDE500VF1 11087729702
YWED9600TU1 WED9550WL2 MEDE500VP0 11087731700
YWED9600TW0 WED9550WR0 MEDE500VP1 11087731701
YWED9600TW1 WED9550WR1 MEDE500VW0 11087731702
YWED9600TW2 WED9550WW0 MEDE500VW1 11087737701
YWED9600TZ0 WED9550WW1 MEDE500VW2 11087737702
YWED9750WL0 WED9550WW2 MEDE500WJ0 11087738701
YWED9750WR0 WED95HEDC1 MEDE500WR0 11087738702
YWED9750WW0 WED95HEDU1 MEDE900VJ0 11087739701
MED6000XR2 WED95HEDW1 MEDE900VJ1 11087739702
MED6000XW0 WED9600SU0 MEDE900VW0 11087751800
MED6000XW1 WED9600TA0 MEDE900VW1 11087751801
MED6000XW2 WED9600TA1 MEDZ400TQ1 11087761800
MED7000AG0 WED9600TA2 MEDZ600TB1 11087761801
MED7000AW0 WED9600TB0 MEDZ600TK1 11087872601
MED7000XG0 WED9600TB1 MEDZ600TW1 11087872602
MED7000XG1 WED9600TU0 NED5700BW0 11087872603
MED7000XG2 WED9600TU1 NED5800DW0 11087892601
MED7000XR0 WED9600TW0 NED7300WW1 11087892602
MED7000XR1 WED9600TW1 NED7500VM0 7MWED90HEFW0
WED80HEBC0 WED9600TW2 NED7500VM1 CED7464GW0
WED80HEBW0 WED9600TZ0 NED7500VW0 MED3000BW0
WED81HEDW1 WED9610XW0 NED7500VW1 MED3500FW0
WED8300SB0 WED9610XW1 WED70HEBW0 MED4000BW0
WED8300SB1 WED9750WL0 WED71HEBW0 MED4200BG0
WED8300SW0 WED9750WL1 WED71HEDW1 MED4200BW0
WED8300SW1 WED9750WR0 WED72HEDW1 MED5100DC1
WED8410SW0 WED9750WW0 WED7300XW0 MED5100DW1
WED8410SW1 WED9750WW1 WED7400XW0 MED5500FC0
WED8500SR0 WED97HEDBD1 WED7540FW0 MED5500FW0
WED8540FW0 WED97HEDC1 WED7590FW0 MED6000AG0
YMED6000XW1 WED97HEDU1 WED75HEFW0 MED6000AW0
YMED9600TK0 WED97HEDW1 WED7600XW0 MED6000XG0
YMEDE500VF1 YIED7300WW1 WED7800XB0 MED6000XG1
YMEDE500VP1 YIED7300WW2 WED7800XL0 MED6000XG2
YMEDE500VW1 YMED6000XG1 WED7800XW0 MED6000XR0
YMEDZ400TQ0 YMED6000XR1 WED7990XG0 MED6000XR1
YMEDZ600TB0 YMEDZ600TW0 YWED70HEBW0 YWED7990XG0
YWED80HEBC0

Installation Instructions

Installation Instructions for 8544771

Tools Needed:

  • ¼ inch nut driver
  • Small flat head screwdriver
  1. Unplug appliance and/or turn off circuit breakers to avoid electrocution.
  2. Using the ¼ inch nut driver to remove the two screws at the top and pull back the top cover until it stops and then lift off.
  3. To remove the console, press on the tab on each side to release the tabs. Next, there are three locking tabs on the top needed to release, lift each to release.
  4. With a small flat head screwdriver, release locking tab of wire harness, pull the panel and set aside.
  5. Screw out the panel that holds the control board and carefully swing it over the dryer. Next, screw out the four screws that hold the console mounting plate with a driver and set aside. Remove the access panel at the bottom of the dryer. Pull the bottom forward. With a driver, remove the two lower screws.
  6. To remove the front cover off, take the door switch wire harness off. There is a locking tab holding it onto the ducting, pull it off. Once released, pull wire harness out and use a flat head screwdriver to release the tab.
  7. Once wire harness is disconnected, begin to remove front panel. Open door to remove the two screws holding the front housing, close door. Take top screws off and slowly remove front panel, not breaking the seal.
  8. If dryer has moisture sensors, pull wire harness out with flat head screwdriver. Once disconnected, remove the two screws that hold front bulk head in. Take out the two lower screws but loosen the two top screws. Remove bulk head out of dryer. Make sure to clean dryer lent.
  9. Taking the belt off the pulleys: With left hand grab idler pulley and pull it toward the outside. With right hand, take belt out the pulleys. Lift the drum and guide it off the dryer using the belt.
  10. With a flat head screwdriver, pop off the wires (closest wire harness to you: red on top and red and white on bottom). Remove hyaline thermostat and thermal fuse, with a socket and ratchet. Next, remove the screw that holds the heating element to the floor. Remove heating element by lifting it up and then out.
  11. To install the new heating element, you have to unscrew the element housing to remove the old heating element. Remove lid, and place in new heating element. Replace lid and screws.
  12. Place heating element in, screw in the screw that holds it to the floor. Place hyaline thermostat and thermal fuse in place and screw them in. Reconnect wires to heating element (red on top, red and white on bottom). Place drum back in making sure the ridges are against the drum.
  13. Reach in with left hand to pull idler pulley toward the side of dryer and with the right hand reattach the belt to the pulley.
  14. Line up blower housing with blower wheel, lift the drum making sure it is seated on the rollers, place bulk head and secure with screws, place all screws and tighten them. Place front panel on, line it up with screw holes, place all screws in. Open door and place two screws, close door.
  15. Reconnecting wire harness: Connect connectors together plug them in. Route them through the clip and lock it. Connect moisture harness. Place bottom access panel back on, place screws.
  16. Place in the control panel support frame, place screws. Swing over the panel that holds control panel, line it up and place screws in.
  17. Place control panel back on, place the wire through the bulk head panel, line up tabs and push it in until it locks in place. Grab wire harness and plug it into the control board. Place top back on by pushing it in until it lines up the tabs. Place screws back in.
  18. Finally, plug it back in and repair is complete.

Return Policy

Items bought from Snap Supply can be returned within 30 days of receipt of shipment. Alterations to Snap Supply products is a violation of the return policy and will result in a nonrefundable product. To ensure your satisfaction with our products please contact us with any questions.

Click here for more about our Return Policy

Free Shipping

Shipping can be expensive, that is why Snap Supply provides free shipping on all orders! No minimum order amounts, that force you to buy something you don't need. Order before 1 PM Eastern and it will ship that same day!

Warranty

Buy with Confidence! Snap Supply Parts always come with a 1 Year Warranty.

Click here to learn more about our Warranty Policy

You recently viewed

Clear recently viewed

Customer Reviews View on Amazon
 

  out of 5 stars


5 star
 
4 star
 
3 star
 
2 star
 
1 star
 

Trustpilot