Use ctrl+F then enter your model number in search bar and hit enter

Installation Instructions for 5301EL1001G

Tools Needed:

• Screwdriver

1. Unplug appliance and/or turn off circuit breakers to prevent electrocution.
2. Remove screws in the rear of the dryer. Pull main top back and lift. Remove control panel by lifting locking tabs and lift panel forward. Remove the screws securing the support bracket.
3. Disconnect door switch wire harness and set aside.
4. Open dryer door and remove the lower two screws, lift front panel forward and lift. Disconnect the light switch and moisture sensor wire harnesses.
5. Remove the front bulk head screws. Remove the screws that secure the duct housing to the blower assembly. Remove the front bulk head.
6. Reach in under the drum to pull the idler pulley toward the outside of the machine to remove the belt off the pulley. Guide the drum out of the machine with the belt.
7. Disconnect the bottom two wires and the wires from the rear high limit thermostat from the heating element. Remove screws securing the heating element and remove the old element.
8. To install the new element, insert the new element the same way the old one was installed. Replace the screws. Reattach all wires.
9. Guide the drum back into the machine and make sure the dryer belt is placed with the ridges facing down. Reach in to reattach the belt into the idler pulley.
10. Replace the front bulkhead, replace screws to secure the bulkhead and the duct housing. Replace the moisture sensor and light switch wire harnesses. Replace the front panel, open door and replace the two screws. Close door.
11. Replace the support bracket by inserting them into the slots and securing with the screws, reattach the door switch wire harness. Replace the control panel and secure with screws. Reattach the main top and secure with screws.
12. Plug in appliance and dryer is all set.

Note:

If you are replacing your dryer element, thermal fuse or thermostat because your dryer is having trouble heating up, we recommend replacing the dryer element, thermal fuse and the thermostat. 

Click here to take a look at dryer element and thermostat kits, which include the thermal fuse.

Shipping Info

Same Day Shipping 

If you place your order between Monday - Friday before 3 p.m., your order will be shipped on that day. If you order on Saturday before 12 p.m., your order will be shipped on that day. If you place your order outside these times, call us at 1-802-727-4126 and we will do our best to get it out the door.

Quick Delivery, All Over The Country

We ship to 61% of the country in just 2 business days - See Shipping tab for more information!  Free shipping includes Saturday and Sunday delivery. 3-day delivery from the East Coast all the way to the Rocky Mountains and more!

We Stay On Top of It

We are using the most reliable options available. Even though all major carriers are experiencing delays, we are always happy to help. If you have a question about the status of your shipment, call us directly for the quickest response at 1-802-727-4126.

We’re Always Happy to Help

Our support team can be contacted via email at Suppot@snap.parts, or you can call us at 1-802-727-4126 during business hours. In the event that you need support outside of business hours, snap.parts has an instant message support chat that can help you solve any problem.

Description

Need a new dryer element? It might need to be replaced in the event that your dryer is not fully drying clothes. Maybe it is taking longer than usual for your clothes to dry - or maybe they're still wet when the dry cycle is finished! If that is the case, your dryer element might need to be replaced! 

• Cross Reference Information 
  5301EL1001J, 1377645, 5301EL1001E, 5301EL1001G, 5301EL1001U, 5301EL1001W, AH3527790, EA3527790, PS3527790
• Quality you can Trust! All Snap Products are made with premium materials and are tested so they last.
• Compatible with the following Dryer brands: LG

Just because parts look the same does not mean that they are the same. Use the model numbers below to ensure that this part is compatible with your appliance! 

All Snap parts come with installation instructions to help you with your repair. If you need more help, you can always contact us for further assistance. Email us at support@snap.parts or give us a call at 1-877-269-0086. Product pages also contain repair information.

Use ctrl+F then enter your model number in search bar and hit enter

Installation Instructions for 5301EL1001G

Tools Needed:

• Screwdriver

1. Unplug appliance and/or turn off circuit breakers to prevent electrocution.
2. Remove screws in the rear of the dryer. Pull main top back and lift. Remove control panel by lifting locking tabs and lift panel forward. Remove the screws securing the support bracket.
3. Disconnect door switch wire harness and set aside.
4. Open dryer door and remove the lower two screws, lift front panel forward and lift. Disconnect the light switch and moisture sensor wire harnesses.
5. Remove the front bulk head screws. Remove the screws that secure the duct housing to the blower assembly. Remove the front bulk head.
6. Reach in under the drum to pull the idler pulley toward the outside of the machine to remove the belt off the pulley. Guide the drum out of the machine with the belt.
7. Disconnect the bottom two wires and the wires from the rear high limit thermostat from the heating element. Remove screws securing the heating element and remove the old element.
8. To install the new element, insert the new element the same way the old one was installed. Replace the screws. Reattach all wires.
9. Guide the drum back into the machine and make sure the dryer belt is placed with the ridges facing down. Reach in to reattach the belt into the idler pulley.
10. Replace the front bulkhead, replace screws to secure the bulkhead and the duct housing. Replace the moisture sensor and light switch wire harnesses. Replace the front panel, open door and replace the two screws. Close door.
11. Replace the support bracket by inserting them into the slots and securing with the screws, reattach the door switch wire harness. Replace the control panel and secure with screws. Reattach the main top and secure with screws.
12. Plug in appliance and dryer is all set.

Snap Supply now offers wholesale.
Sign in 

Sign up

Items bought from Snap Supply can be returned within 30 days of receipt of shipment. Alterations to Snap Supply products is a violation of the return policy and will result in a nonrefundable product. To ensure your satisfaction with our products please contact us with any questions.

Click here for more about our Return Policy

Shipping can be expensive, that is why Snap Supply provides free shipping on all orders! No minimum order amounts, that force you to buy something you don't need. Order before 1 PM Eastern and it will ship that same day!

Buy with Confidence! Snap Supply Parts always come with a 1 Year Warranty.

Click here to learn more about our Warranty Policy