Description

Shipping Info

Same Day Shipping 

If you place your order between Monday - Friday before 3 p.m., your order will be shipped on that day. If you order on Saturday before 12 p.m., your order will be shipped on that day. If you place your order outside these times, call us at 1-802-727-4126 and we will do our best to get it out the door.

Quick Delivery, All Over The Country

We ship to 61% of the country in just 2 business days - See Shipping tab for more information!  Free shipping includes Saturday and Sunday delivery. 3-day delivery from the East Coast all the way to the Rocky Mountains and more!

We Stay On Top of It

We are using the most reliable options available. Even though all major carriers are experiencing delays, we are always happy to help. If you have a question about the status of your shipment, call us directly for the quickest response at 1-802-727-4126.

We’re Always Happy to Help

Our support team can be contacted via email at Suppot@snap.parts, or you can call us at 1-802-727-4126 during business hours. In the event that you need support outside of business hours, snap.parts has an instant message support chat that can help you solve any problem.

Description

• If you are looking for an infinite switch for your Whirlpool range, then be sure to shop with Snap Supply. All of our products are tested for durability and longevity. This part is also compatible with Kenmore, Roper, Inglis, Estate, and KitchenAid.
• Compatible with the following range brands: Whirlpool, Kenmore, Roper, Inglis, Estate, KitchenAid.
• Cross Reference Information
  WP3149400, 3149400, AP3095444, 2786, 310180, 311846, 311858, 311859, 314140, 3148954, AH336989, EA336989, PS336989.

Model Numbers

Use ctrl+F then enter your model number in search bar and hit enter

Installation Instructions

Installation Instructions for 3149400

1. Disconnect electrical power supply to the appliance
2. Remove back panel that houses the Surface Element Switch.
3. Remove the knob and release the 2 screws holding switch in place.
4. Pull the old switch out and remove both of the plugs.  We suggest taking a picture
5. Compare the shafts, if they are the same length proceed if not cut down to size.
   1. If you need to cut down, remove the spring clip attached to shaft
   2. Then use a pairs of pliers to snap it off by holding one below the break off point and using the second to break it off.
   3. Attach the spring clip back to the shaft
6. Connect wires 1 by 1 to the terminals on the new switch
7. Install the switch into place and screw the 2 screws into it to hold it in place
8. Screw back panel back on and give it a test!